01753 825122

Search

ReCorr Guides

The ReCorr web guide system, installed where the web exits the bridge on corrugated cardboard machinery, reduces waste caused by continuous interruptions during the process. The center guide system, developed by Re, accurately controls the layers to reduce common causes of web breaks, including contact with the lateral guides and during width changes. These web breaks and misaligned board cause unnecessary waste of web material and glue.

The metallic frame consists of a motorised guide group, two FISH-EYE (CCD) wide angle reading sensors and a box containing a control system and solenoids.

The system is a Plug & Play solution which is mechanically assembled and pre-wired to allow easy installation. ReCorr can be supplied for single wall control or in a “Master-Slave” configuration where the single faces are guided from a reference given by the outer line.

Depending on the web width range of the application, the system can be provided with fish-eye sensors with 3 different optics or with motorized movement to follow the edge of the material.

FEATURES:

  • Perfect alignment of layers before joining
  • Fish-eye camera sensors and control panel with MWG.10
  • Complete system engineered for quick and easy installation
  • Used for single wall or in master-slave configuration
  • Can be installed on new machines or as a retrofit on old ones
Download the brochure

Kontram is a reliable partner for Finnish industry.  We make industry better through high-quality, sustainable solutions. Our specialties include valves, process automation and electrical components, as well as serving a wide range of measurement needs.

Our 70+ experts stand ready to serve our customers in even the most demanding challenges. Today, Kontram is a community of more than 70 professionals who have been serving our customers since 1966

WEBSITE

Tecnomec 3, based in Turbigo, Italy, was established 35 years ago and company activity is based on planning and building spreader rollers and special products for different fields.

The company provides extensive technical assistance before and after the sale, both directly and through world-wide agents, this includes refurbishment as well as with new products.

Tecnomec3 spreader rollers are designed to eliminate creases and wrinkles from the material being processed and prevent interweaving of slit widths of material in slitting applications.

WEBSITE

Espo slitting systems cover an extensive range of applications for the tissue, paper, converting, non-woven, corrugated cardboard, film and foil markets.

Complete solutions are offered for on-line integration into the cutting line, rewinder, slitter/rewinder, sheeter or cutting machine.

Manual or fully-automatic, systems can be fully customised to customers’ requirements and all incorporate features designed to improve the slitting quality, reduce slitting problems and minimise set up and maintenance time.

WEBSITE

With 25 years’ experience and a product range that includes Flexo Folder Gluers, Printer Slotters, Folder Gluers and Rotary Die Cutters, Sipack prides itself on offering the best of Italian technology.

Servo technology is applied to all machinery to achieve maximum precision and Sipack Customer Care specialists are available to assist on site in ensuring production goals are met.

WEBSITE

Weingrill, an Italian company based in the Pinerolo area, is a leader in the production of components for the paper industry and screw jacks for numerous industrial applications. 

2022 marks 70 years of production and, since its inception, the company has shifted from the design and fabrication of electro-mechanical devices to high technology components for the paper industry with research and development being an important aspect. State-of-the-art production facilities offer customised solutions based on customer needs. In 1997 Weinghrill achieved ISO 9001 quality certification.

Today, Weingrill’s production is known all over the world: high standards in terms of reliability and technology are appreciated by over 3000 customers in 30 different countries. The company’s guiding principles are flexibility, productivity, quality and product and customer care.

WEBSITE

Dotec is a family-owned company, established in 1981, that always puts the customer first with its reliability, flexibility and excellent service. The company is constantly developing new technologies and products and has striven to become the global supplier of bespoke solutions for a variety of markets with its broad portfolio of standard-developed LiftAssists. The company’s innovation is centred on the operator’s needs and process optimisation with a focus on ease of use, safety and simplicity, ergonomics, design, efficiency and proportional/flexible movement.

The Dotec LiftAssist range has specific characteristics based on ease of operation and has a very short learning curve. Everything can be controlled by a finger touch which makes it easy to work with and why it is called the Friendly LiftAssist.

WEBSITE

Höcker Polytechnik provides customers with high quality machinery, equipment and solutions for waste and extraction solutions – delivered quickly and reliably. From the initial project sketches through to commissioning, the company’s focus is always placed on customer benefit and satisfaction.

The company is an owner-managed family business with production sites in Germany and Poland.  Its clean air technology products and solutions consistently comply with current state-of-the-art safety technology and the company continually strives for an improvement of services, products and processes.

Environmentally friendly technologies and processes are integrated into development and production at all levels of the company and optimised for sustainability.

WEBSITE

Construcciones Mecanicas Mecoval, based in Valencia, specialises in the manufacture of machinery, subsets and pieces for a variety of sectors.  The company has the widest range of mechanical chucks with over 20,000 units sold around the world. Their low cost and simple design mean they are perfect for corrugation, textile, plastic plants, etc. There are no maintenance problems, since the chucks are designed without any complex mechanisms which may break or fail due to dust or dirt.

Established over 30 years ago, today the company employs state-of-the-art equipment combined with traditional machinery to produce designs and for manufacturing, with the objective of giving our world-wide customers the best quality and delivery time.

WEBSITE
Ircon Solaronics Logo

Ircon Drying Systems AB, Sweden and Solaronics SA, France have joined forces and operate under the brand name Ircon|Solaronics as of summer 2018.

Our non-contact drying solutions based on gas or electrical infrared and air drying / heating technology have served the industry since more than 50 years. We have custom solutions for most industrial processes including but not limited to Paper & Board, Metal Processing, Food, Glass and Industrial Flooring.

We can satisfy your process requirements with solutions ranging from individual units to a complete turnkey package of fully-engineered drying solutions with air turning, cooling and energy recovery solutions.

WEBSITE
Officine Airaghi Logo

Located in Italy, Officine Airaghi Srl was founded in 1948.  Experience gained over the decades has furnished the company with a thorough knowledge and understanding of the technical and maintenance problems of the paper industry resulting in the design and production of a wide variety of spare parts for stock preparation machines.

This variety is enabled by numerous CNC machine tools that permit production of all parts in a very short time. 

All fillings are made of special stainless steel anti-wear alloys for maximum durability and reliability.

WEBSITE

Based in Shanghai, RMM Dasong has more than 28 years’ experience in corrugating roll manufacturing.

With an annual production of more than 3,000 units from a production area of 50,000 square metres and, with 2,500 end-users worldwide, the company’s products have been exported to over 60 countries.  It has achieved an excellent reputation with its customers and has become the leading corrugating roll supplier.

WEBSITE

Profile to follow

WEBSITE

Re SpA is an Italian company whose history bears witness to an unwavering commitment to innovation and quality. From R&D to production, every step is taken in-house to guarantee tailor-made solutions. Under the motto “One Company, 1000 solutions” they are your one-stop partner with a wide range of high-tech components designed to increase the productivity of your machinery and reduce waste. With a comprehensive service, from consulting to after-sales, they realise your vision.

Discover excellence in industrial controls, discover Re!

WEBSITE

SchäferRolls has been producing polymer-based precision roll covers for all industries since 1946. When it comes to roll covers for the manufacturing and converting of paper products, the company has been a leading light for decades, their products reflecting experience gained from applications meeting special demands with respect to roll position, end product type and machine operator preferences. At the heart of this success is a commitment to taking product quality, productivity and overall paper manufacturing and converting performance to new levels.

The plants at Renningen (Headquarters, Germany), Brnik (Slovenia) as well as at Farmington, NH and Covington, VA (USA) currently employ a workforce of over 300. Production facilities with a total production area of more than 30,000m² are able to handle and service roll systems up to lengths of 15,000 mm, diameters of 2,000 mm, and total weights of up to 100 tons.

WEBSITE

For over 60 years Svecom has provided innovative and highly customisable systems for the winding and unwinding of reels – products including air shafts, safety chucks, expanding chucks, core plugs, reel spools and shaft extractors.

Today, the company has over 200 employees, a production site of 25,000 square metres, and a sales network that covers the globe.

WEBSITE
Macarbox Logo

Located in Northern Spain, and with 200 employees, Macarbox manufactures high performance and technologically advanced converting machinery for the corrugated board industry.

The company philosophy is to bring its technology and innovation to customers in order to provide high quality, flexible solutions.

WEBSITE

Founded in 2006, CORRFLEXO is a Solingen based German supplier of all kind of machine knives, grinding wheels, polyurethane rolls and other spare parts used in the corrugated board industries.

CORRFLEXO offers competitive prices and quick delivery. Many satisfied customers in Europe, Asia, Middle East and other geographical territories are depending on our high quality products and services.

WEBSITE